Roof Refurbishment / Gutter Repair & Lining

“IPRS Limited is the sole Republic of Ireland distributer and GE Qualified Applicator for the GE Silicones Protective Coatings Programme co-ordinator and Seamsil system manufacturer Delvemade Limited in accordance with Application training provided by Giromax Technology Ltd”.

It is our responsibility to distribute, control and apply all GE Silicone Protective Coatings to ensure correct technical and aesthetic product application under the strict guidelines/training provided by Giromax Technology Ltd.

In progress technical assessments are undertaken to ensure that each project proceeds in accordance with the agreed specification. Typical monitoring includes Surface Preparation, Application Standards, Thickness & Adhesion Tests.

Coris Refurbishment Solutions – Platinum Supply Chain Partner

Giromax Technology is the Platinum Supply Chain Partner for all repaint projects with the Platinum Partnership System Warranty administered by Corus Refurbishment Solutions.

The GE Silicone Protective Coatings Programme provided by IPRS Ltd. is as follows :


Cut Edge Corrosion solution by GIROSIL® Edge RC-E

Corrosion commonly starts as edge peel at the cut edges of a metal sheet. It develops through normal weathering, mainly on roofs and rapidly accelerates, especially at the sheet overlap as a result of capillary held rainwater.Edge corrosion is a progressive problem and, if neglected, can develop away from the cut edge, destroying the weather-sealed lap joint and gutter overhang. Early detection and effective treatment prevents costly future sheet replacement.

Preserve cut edge joint protection without disturbing existing fixings or sheets.GIROSIL® EDGE RC-E is the revolutionary next generation of coatings from Giromax, designed to treat both the top and reverse side of the cut edge through matchless corrosion treatment and encapsulation. Fully moisture tolerant GIROSIL®provides a strong, flexible external joint that can be installed without disturbing existing fixings and sheets and remains unaffected by UV or weather and temperature extremes.


GIROSIL® EDGE RC-E has been developed against a background of decades of experience of roof repair and is designed to overcome application limitations imposed by adverse weather conditions. It is a fully moisture tolerant system, incorporating laminar flake tecnology in both Basecoat and Sealant followed by brush applied coloured Topcoat.

Its application simplicity makes GIROSIL® EDGE RC-E a cost effective  cure for cut edge corrosion treatment and is offered with a 15 year performance guarantee.


Simple – Seamsil -Metal edge, Gutter Systems, Defective Joints Treatment & Protection.

Its built in simplicity makes SEAMSIL ® a most cost effective and reliable cure for edge and overlap corrosion problems. Colours – SEAMSIL edge and overlap protection stem is available in a range of colours to match the most popular shades used in industrial claddings. SEAMSIL has good elastic and flexibility properties to withstand normal surface movements. This ensures continued optimum performance even in the most aggressive environments.

Natural – G.E. Delcote Architectural Coating


Inorganic Silicone Technology ensures that the G.E. Delcote Architectural coating remains naturally unaffected by UV or extremes of weather and temperature. Silicone coatings are non-sacrificial and nauturally halt the process of corrosion. No corrosion inhibitors or primers are required. Used in conjunction with Seamsil, its fast application minimises site disruption.


Effective – Delcote HPG Gutter Substrate Lining

Delcote HPG is a liquid applied elastomeric silicone membrane with excellent vapour breathing properties which cures to form a tough protective coating. Delcote HPG is ideally suited to preserve most commercial gutter and rainwater systems.Delcote HPG is normally applied without the need to prime and is suitable for application once surfaces are clean, dry and corrosion free. Delcote HPG is applied by brush or roller and is applied in two coats each of a contrasting colour to ensure complete coverage.


Protective – Delglaze Weatherproof Coating

Delglaze is a high performance, high build, single component moisture curing aliphatic polyurethane coating that cures to provide a clear, tough membrane principally for the re coating and sealing of aged and weathered grp rooflights. Once clean of moss and lichen, Delglaze seals in the exposed fibres, remaining flexible enough to accomodate rooflight movement. Fully cured Delglaze provides a tough clear elastomeric coating with crack bridging capabilities that is particularly effective on difficult to replace rooflights on an asbestos cement roof. Delglaze is based on a unique blend of polyurethane resins to produce a coating, which provides a tough durable finish with a high degree of impact, erosion and weather resistant properties.